AS-ST300WU
Drains for street gullies AS-ST300WU
CE designation- Standard PN-EN 1433:2005
Declaration of Conformity
Hygienic Certificate HK/B/0786/01/2011
Catalogue No H.I
DRAINS FOR STREET GULLIES
| H.I. | Part No. | BASIN ELEMENTS | Width mm | Height mm | Length mm | Weight kg | Grade strength |
|---|---|---|---|---|---|---|---|
| H.I.1. | C | an adaptor ring full (the groove) | 635 | 90 | 800 | 96.0 | |
| H.I.2. | D | an adaptor ring 3/4 (the groove) | 536 | 90 | 800 | 77.0 | kl. E 600 kN |
| H.I.3. | E | Strenghtening ring | 635 | 90 | 800 | 87.0 |
BASIN ELEMENTS
| D.III. | Part No. | BASIN ELEMENTS | Width mm | Height mm | Length mm | Weight kg |
|---|---|---|---|---|---|---|
| D.III.1. | A | transient element without outlet | 393 | 440 | 675 | 97.0 |
| D.III.2. | A | transient element with front outlet | 393 | 440 | 675 | 91.0 |
| D.III.3. | A | transient element with front outlet | 393 | 440 | 675 | 91.0 |
| D.III.4. | B | element with bottom without outlet | 393 | 450 | 675 | 120.0 |
| D.III.5. | B | element with bottom with side outlet | 393 | 450 | 675 | 114.0 |
| D.III.6. | B | element with bottom with front outlet | 393 | 450 | 675 | 114.0 |
Specification
{slider 1. Intended use – place of application}
draining roads, streets, car parks, entrances, petrol stations, car washes, etc.
{slider 2. Technological capabilities}
Multifunctional gully system AS can be: inspection, drain or sump and consist of:
- Full adaptor ring or 3/4 (inlet)
- Strenghtening ring
- Transitional/passage elements type 'A'
- Elements with a 'B' typed bottom
- Dirt bucket
{slider 3. Technical information}
Dimensions:
- length: 675 mm
- external width:393 mm
- internal width: 303mm
- height: transient element 440mm, element with bottom 450mm
THE CHANNEL BODY is made of concrete in the C55/67 strength class with polymer additives and reinforced with alcali – resistant glass fibre. This concrete improves the properties of the channel and makes it more resistant to bending and hitting. This concrete is also resistant as well as to long – lasting exposure to frost and defrosting salts (“+R).
THE BODY WALLS are protected with a coloured impregnation which limits water vaporization at the concrete curing time and protects the channel against environmental aggressiveness. The impregnation increases also adhesiveness of the external wall to the concrete housing. Applying the coloured impregnation makes it easier to control if protection has been made correctly. The channel bodies are finished with “male” and “female” cut outs enabling to provide tight connection of AS drainage system elements.
Inlet- an adaptor ring adjusted to the street inlets AS-WU 400x600 as well as to street inlets produced by other companies.
The wells incorporation- it is carried out on a foundation base
Combining elements- on a concrete strip footing
{slider 4. Quality, workmanship precision, and others}
This very simple and safe to install and apply product, entirely fabricated of Polish materials by a domestic company is of very high quality.
The top product quality is assured by AS PPH A. Sobiesiak due to applying "High Strength Concrete" and materials protected permanently against corrosion.
The guarantee of the top quality is the ISO 9001:2008 certificate, too.
{slider 5. Safety}
Applying AS drainage system does not cause any safety risk when installing it, however the general regulations of occupational safety and health for Construction and Installation works should be followed.
The wells for AS street inlets will allow you to avoid burdensome breakdowns/damages and degradation of the construction on condition that the installation instructions and design guidelines will be applied correctly.Therefore,the maintenance will be limited to cleaning only.
{/sliders}
Photos
